YH-10-KG series hall effect proximity sensor/switch Position sensor
Description
Yuli Intelligent YH-10-KG series position/proximity sensors are designed for sensing target’s position. With Hall-effect integrated circuit (IC) and a permanent magnet all sealed inside the rugged package,the IC detects alternation of magnet’s flux density when it approaches or distanced a permanent magnet target.Sensor will output low level voltage(normally open type) when magnet target getting closer or high level voltage when target staying away.
VALUE TO CUSTOMERS
- Higher durability:
Wide operating temperature range enhances higher reliability
Wide supply voltage range improve compatibility
IP69
Built in high-temperature magnet with strong stability
Electrical noise immunity protection for longer equipment uptime
- Optimized product structure, minimize service cost.
- High performance design redundancy, minimize issue of after sales service.
Features
- The output waveform is high and low level
- Wide operating temperature range: -50°C to 125°C
- Easy installation, fixed position
- Environmental sealing: Moisture ingress protection
- Strong electrical noise immunity, EMC EN IEC 61000-6-4:2019/EN IEC 61000-3-2:2019+A1:2021/EN 61000-6-2:2019
- Robust resistance to vibration: IEC60068-2-64-2019
- Wide working frequency range:0Hz-20KHz
- Wide supply voltage range: DC 4.5V-DC12V
- Low power consumption current:3mA-5mA
Potential Application
- Proximity measurement
- Ignition control
- Measurement of camshaft position
- Proximity switch
| ELECTRICAL SPECIFICATIONS | |||
|---|---|---|---|
| CHARACTERISTIC | CONDITION/COMMENT | PARAMETER | |
| YH-10-07-KG | YH-10-14-KG | ||
| Supply Voltage | DC 12V ISO 16750-2 | 4.5V-12V | |
| Consumption current | 3mA-5mA depends on power supply | ||
| Reverse Voltage Protection | ISO 16750-2 | -12V | |
| Short Circuit Protection | ISO 16750-2 | 12V | |
| Signal Type | NPN(normally open type) | ||
| High Output Voltage (Voh) | Away from magnet S pole | Voh≥Vcc-0.5V | |
| Output low level | Closer to magnet S pole | ≤0.3V | |
| Working frequency | 0 Hz-20K Hz | ||
| Insulation Resistance | ISO 16750-2:2012 | >10 MOhm at 500 Vdc | |
| MECHANICAL SPECIFICATIONS | |||
| CHARACTERISTIC | PARAMETER | ||
| YH-10-07-KG | YH-10-14-KG | ||
| Air gap | ≥10mm Related to magnetic field strength | ||
| Housing Material | ABS | PA66+GF30 | |
| Connector model | JST-XHB-3 | / | |
| Lead length | 600±20mm | 500±20mm | |
| Magnet type | Neodymium iron boron (S-efficient) | ||
| ENVIRONMENTAL SPECIFICATIONS | |||
| CHARACTERISTIC | CONDITION/COMMENT | PARAMETER | |
| YH-10-07-KG | YH-10-14-KG | ||
| EMC | EN IEC 61000-6-4:2019EN IEC 61000-3-2: 2019+A1:2021EN 61000-3-3:2013+A1:2019+2021EN IEC 61000-6-2:2019 | 10 kHz to 10 MHz, 60 m/V | |
| 200 MHz to 2.7 GHz, 100 V/m | |||
| 800 kHz MHz to 1000 MHz, 3 m/V | |||
| Resistance to Vibration | IEC60068-2-64-2019 | 29.8 GRMS, 24 Hz to 2000 Hz, MIL-STD-202-214 | |
| ESD | ±4 kV contact, ±8 kV air | ||
| Thermal shock cycle | -50°C to 145°C | 48 hours | |
| Humidity | 95 %RH at 55°C | 10 %RH to 90 %RH at-40°C to 85°C,150 cycles, 600 hr total | |
| Salt Fog | 5% salt solution by mass at 35°C and 93% RH for 400 hr, tested to 2000 hr with no ingress in the sensor packaging area | ||
| Flame retardant grade | UL94-V-0 | The material stops burning within 10 seconds, and the residue after burning does not appear burning sparks or flames | |
| Oil resistance grade | ASTM D471 | No issue when immersed in vehicle oil for a long time | |
| Operating Temperature | -50°C-125°C | ||
| Storage Temperature | -40°C-70°C | ||
Principle
MOUNTING DIMENSIONS
